Download RelayFax Network Fax Server

Requirements

These are the minimum recommended system requirements for RelayFax to run. This does not take into account running multiple programs simultaneously. To run several programs on the computer at the same time, that computer should exceed these recommendations.

Server Requirements

  • Microsoft Windows OS:
    • Windows XP (32-bit and 64-bit)
    • Windows Server 2003 (32-bit and 64-bit)
    • Vista (32-bit and 64-bit) (excluding Vista Home Edition)
    • Windows Server 2008, Windows 2008 R2 (32-bit and 64-bit)
    • Windows 7 (32-bit and 64-bit)
    • Windows Server 2012 (32-bit and 64-bit)
    • Windows 8 (32-bit and 64-bit)
  • Computer with Pentium IV 1GHz (or higher) processor.
  • 512 MB of memory (1GB recommended)
  • Minimum hard disk space required: 100 MB plus space for logs and saved faxes
  • Ethernet Network Card
  • TCP/IP network protocol installed
  • Internet or Intranet communication capabilities
  • Access to a standard SMTP/POP3 Email server. This server does not need to be installed on your LAN. RelayFax's dialup features make it possible to use your ISP's mail server, or any other server that you are allowed to use for collecting and sending email.
  • One or more fax boards or class 1, 1.0, 2, 2.0, or 2.1 fax modems, or a T.38 compatible VOIP gateway (when using Fax-over-IP) to convert T.38 packets to audio for transmission to a conventional fax machine)

Client Requirements

  • Microsoft Windows OS:
    • Windows XP (32-bit and 64-bit)
    • Windows Server 2003 (32-bit and 64-bit)
    • Vista (32-bit and 64-bit) (excluding Vista Home Edition)
    • Windows Server 2008, Windows 2008 R2 (32-bit and 64-bit)
    • Windows 7 (32-bit and 64-bit)
    • Windows Server 2012 (32-bit and 64-bit)
    • Windows 8 (32-bit and 64-bit)
  • Computer with Pentium IV 1GHz (or higher) processor.
  • 512 MB of memory (1GB recommended)
  • Minimum hard disk space required: 30 MB
  • TCP/IP network protocol installed
  • Internet or Intranet communication capabilities
  • Access to a standard SMTP/POP3 Email server. This server does not need to be installed on your LAN. RelayFax's dialup features make it possible to use your ISP's mail server, or any other server that you are allowed to use for collecting and sending email.

RelayFax Compatible Hardware

Alt-N welcomes reports from customers who have successfully implemented a variety of fax modems, boards and devices with RelayFax. Alt-N will work collaboratively with the customer to confirm the compatibility and document the outcome.

Here are guidelines on how to use the information in this page:

  • The information on this page is provided on an "as is" basis and does not imply any kind of guarantee or warranty of any kind.
  • Your use of the information on this page or materials linked from this webpage is at your own risk.
  • Alt-N reserves the right to change or update the listings on this this page without notice at anytime.
  • When a customer reports an issue, Alt-N will make a committed effort to resolve any technical issues affected by RelayFax as covered by Alt-N's support policies.
  • If Alt-N concludes that the fault or defect is attributed to the use of a third party component, then Alt-N reserves the right to withhold any or all support obligations.

RelayFax 6.x Supported Fax Boards

ManufacturerModelNotations
Mainpine Ltd IQ Express
1,2,4 and 8 Ports
 
Natural MicroSystems AG-8 and 8/DID  
  AG-80, T1 and E1  
  AG Dual T and E  
  AG Quad T and E  
  AG 2000 Series  
  AG 4000 Series  
Commetrex M-4,M-8,M-T1  
Comtrol RocketModem II PCI 4 and 6  
  RocketModem III PCI 4 and 8  
Cantata (formerly BrookTrout) TR1034 Digital
TR1034 Analog
Note: Requires special drivers, contact support for details.
  TruFax 200 BRI
TruFax 200
Note: May require the -n option on faxinit. Currently, only legacy non-RoHS TruFax boards are supported.
     

 

RelayFax 6.x Supported Fax Modems

ManufacturerModelIdentificationNotations
Best Data V.92 ATI0
56000
ATI3
ACF3_V1.010-V90_P21_FSH
Class: 1
Init String: AT&F&C1&D2&K3S7=55S0=0
Flow Control: Hardware (CTS)
Conexant SoftK56 ATI0
56000
ATI3
SoftK56V_B2.1_V5.03
Class: 1
Init String: AT&F&C1&D2&K3S7=55S0=0
Flow Control: Hardware (CTS)
Creative Modem Blaster V.92   Class: 1
Init String: AT&F&C1&D2&K3S7=55S0=0
Flow Control: Hardware (CTS)
DLink V.90 ATI0
V2.210-V90_2M_DLS
ATI3
AC/K56
Class: 1
Init String: AT&F&C1&D2&K3S7=55S0=0
Flow Control: Hardware (CTS)
MultiTech Systems V90 Multimodem ATI3
LT V.90 1.0 MT5634ZBA Serial Data/Fax Modem Version 8.19j
Class: 2
Init String: AT&F&C1&D2&K3S7=55S0=0
Flow Control: Hardware (CTS)
  V92 Multimodem ATI3
LT V.92 1.0 MT5634ZBAV-V92 Serial Data/Fax/Voice Modem Version 1.28c
AT+FMFR?
Multi-Tech Systems
AT+FMDL?
MT5634ZBAV-V92
Class: 2.0
Init String: AT&F&C1&D2&K3S7=55S0=0
Flow Control: Hardware (CTS)
U.S. Robotics V.92 ATI0
5601
ATI3
U.S. Robotics 56K FAX EXT V5.4.30
Class: 1
Init String: AT&F&C1&D2&H1S7=55S0=0
Flow Control: Software and Hardware (CTS)
Zyxel U-1496E ATI0
1496
ATI3
ZyXEL U-Modem LED enhanced
Class: 2
Init String: AT&F&C1&D2S7=55S0=0
Flow Control: Software
Zoom V.92/V.90 ATI0
56000
ATI3
Zoom ACF3_V1.900H-V92- A Z201
Class: 1
Init String: AT&F&C1&D2&K3S7=55S0=0
Flow Control: Hardware (CTS)

 

RelayFax 6.x Supported CAPI 2.0 Devices

ManufacturerModelNotations
AVM Fritz! card  
Eicon Networks Diva Pro 3.0 Note: This board can only send or receive a fax on 1 channel at a time. Set
usable channels to 1.
  Diva Server  

Download

Download RelayFax Server

Download RelayFax Client

Download RelayFax OCR Module

Download RelayFax Brooktrout Driver

Download RelayFax Manual

Download RelayFax Modem List

Download RelayFax Fax Management Whitepaper

Download RelayFax Brochure

Buy Now

All Prices are in USD. If you need a quote in Malaysian Ringgit (MYR) please send an email to This email address is being protected from spambots. You need JavaScript enabled to view it..